let say you have 1 pc and 2 Laptop.that all machine have wifi cards. and only one wired network access is available.

we will setup the PC as Ad-Hoc access point ..

the pc connect to LAN via wired network. and bridge it with the wifi cards.then..
the other two laptop connect to pc via wifi .. and get through to access LAN and also internet.
Let’s start with the pc.

Requirement :

1. one wired network card.

2. one wifi card.

3. one cable to LAN. router or switch.

4. window xp ? coz i did’nt manage the bridge on linux.

step.

1. setup the wired network card to obtain automatic ip via dhcp. the ip will be provided by streamyx router.

home-properties.jpg

home-ip.jpg

2. setup wifi card as ad-hoc access point. assign keys if you wish to keep away others.

wfi-properties.jpg

wd.PNG

Go to Wireless Network (Tab). Then Click add. the menu below should appear.

wf.PNG

here can set SSID and.. keys. for you ad-hoc AP.

click Ok . and close.

3. now should bridge this two.

highlight this two network setting.

right click -> Bridge.

bridge.jpg

Then should wait for couple of second.

mac.jpg

Continue..

wait till it bringing down LAN and bringing it up again.. then to confirm.

run -> cmd

ipconfig /all

should spit something like this.

ip_config.PNG

then can try ping google.com.my or anything.

..

4. now we are going to configure for the laptop.

ss.PNG

Main menu->System Settings -> Network.

it may prompt for root / admin password.

n.jpg

create new . wireless connection.

wifi.jpg

de.jpg

aaaa.jpg

aca.jpg

Acivate it.. and wait till it is up. test it.. with a ping to DNS server.

ping.jpg

Done.